This is an old revision of the document!
Bambu Lab 3D Printers
Two machines. 
confirm model (X1 Carbon? P1S? A1?) and whether AMS units are attached
| Type | FDM, fast (CoreXY) |
|---|---|
| Build volume | 256 × 256 × 256 mm confirm for our model |
| Materials | PLA, PETG; others by arrangement |
| Slicer | Bambu Studio |
| File transfer | LAN / SD card our lab setup |
Before you start
- Fast printers fail fast too; watch the first layer.
Workflow
- Slice in Bambu Studio with the printer's profile.
- Send the job (LAN or SD card, per lab setup).
- Watch the first layer. Remove prints only after the bed cools.
Troubleshooting
| Symptom | First things to try |
|---|---|
| AMS filament jam | our procedure |
| Adhesion problems | Clean plate with IPA, correct plate type selected in slicer |
Manuals
- Bambu Lab wiki — official docs.
Videos
- Bilibili — Bambu Studio basics replace search links with specific videos
- XHS — Multi-color printing